
Summer Blinds: 6 Best Choices to Beat the Perth Heat
November 5, 2025Knowing how to measure windows properly is the first step to curtains and blinds that look tailored rather than “nearly right”. A few millimetres can be the difference between a roller blind that sits neatly in the recess and one that leaves a bright strip of light down each side. This guide walks you through the process in seven easy steps, so you can get accurate numbers for planning, budgeting or comparing quotes.
If you would rather not climb a ladder at all, our team offers a free measure and quote anywhere in the Perth metro area. Either way, it helps to understand what is being measured and why.

We measure windows in every room before making, so each curtain fits its track perfectly.
What You Need Before You Measure Windows
- A metal tape measure (fabric tapes stretch and give inconsistent readings).
- A pencil and notepad, or a simple measurement form with a line for every window.
- A sturdy step ladder for tall windows and doors.
- A second person to hold the end of the tape on wide windows.
Always measure in millimetres, not centimetres. Blind and curtain makers work in millimetres, and rounding to the nearest centimetre is a common cause of poor fit.
Step 1: Decide on Recess Fit or Face Fit
Before you measure windows for blinds, decide where the blind will sit:
- Recess fit (inside mount): the blind sits inside the window reveal. It looks clean and built-in, and suits roller, venetian and Roman blinds when the recess is deep enough.
- Face fit (outside mount): the blind is fixed to the wall or architrave above the window and overlaps the opening. It is better for blocking light, hiding uneven frames and making a window look larger.
Curtains are almost always face fitted, on a track or rod mounted above the window.
Step 2: Measure the Width in Three Places
For a recess fit, measure the inside width at the top, middle and bottom of the window. Older Perth homes often have reveals that are slightly out of square, so the three numbers can differ. Write all three down and use the smallest measurement so the blind will not catch on the narrowest point.
For a face fit, measure the full width you want to cover, then add roughly 50–100 mm on each side so the blind overlaps the opening and limits light bleed.

Bring your notes to our O’Connor showroom, or we can measure windows at your home for free.
Step 3: Measure the Drop (Height)
Measure the height on the left, centre and right. For a recess fit, measure from the top of the reveal down to the sill and use the longest measurement; your maker will allow for clearances. For a face fit, measure from where the bracket will sit (usually 50–100 mm above the frame) to where you want the blind to finish.
Step 4: Check the Recess Depth
Recess depth decides whether a blind can actually sit inside the window. Measure from the face of the glass (or the window frame) to the front edge of the reveal. Look out for handles, winders, locks and security screens that stick out, because a blind needs clear space to roll or tilt. As a rough guide, roller blinds need less depth than venetians, and shutters need the most.
Step 5: Measure Windows for Curtain Width
To measure windows for curtains, start with the track or rod width, not the glass. Extend the track 150–300 mm past each side of the window so the curtains can stack back clear of the glass and let in more light. Wide sliding doors may need even more stacking space.
Your curtain maker will then add fullness, which depends on the heading style. Pinch pleat and wave headings typically need around twice the track width in fabric, which is why they hang in such generous folds. You can read more about the options on our curtain heading types page.
Step 6: Measure the Curtain Drop
Measure from the top of the track (or the bottom of the rod rings) to where you want the curtain to finish:
- Floor length: finish about 10–15 mm above the floor for a crisp, modern look that does not drag.
- Puddled: add 50–100 mm for a soft, romantic pool of fabric (best in low-traffic rooms).
- Sill length: finish just below the sill, common in kitchens and laundries.
Mounting the track higher, close to the ceiling, makes rooms feel taller. If you plan to do this, measure from the ceiling-height position, not from the top of the window.
Step 7: Record Every Window Clearly
Label each window by room and position (for example “Master bed – left”) and note the fit, width, drop, depth and any obstructions. Take a quick photo of each window as well. When you compare quotes, consistent records make it easy to check that every supplier is pricing the same thing.
Common Mistakes When You Measure Windows
- Measuring the old blind instead of the window.
- Using a cloth tape, or rounding to the nearest centimetre.
- Forgetting door handles, locks and window winders.
- Measuring only once on a window that is out of square.
- Not allowing stack-back space for curtains on sliding doors.
Frequently Asked Questions
Do I measure the glass or the frame?
Neither on its own. For a recess fit you measure the opening between the reveals; for a face fit you measure the area you want the blind or curtain to cover, which is usually wider and taller than the frame.
Should I deduct anything for clearance?
No. Give your maker the exact recess measurements and tell them it is a recess fit. They deduct the right clearance for the brackets and fabric, which varies by product.
What if my window is not square?
That is very common. Record all three widths and heights, and mention the difference. A face fit can hide an out-of-square opening neatly.
Key Takeaways
- Always measure windows in millimetres with a metal tape.
- For a recess fit, use the smallest width and longest drop.
- Measure windows for curtains from the track, not the glass, and allow stack-back space.
- When it is time to order, let a professional measure windows to guarantee the fit.
Should You Measure Windows Yourself?
Measuring yourself is great for early budgeting. For the final order, though, most custom makers re-measure before production, and many guarantee the fit only when they have measured. That is exactly why Eiffel Curtains and Blinds offers a professional, no-obligation measure in your home. We bring fabric samples, check depths and obstructions, and talk through recess or face fit for each room.
Ready for perfectly fitted window furnishings? Book your free measure and quote, or browse our custom blinds and made-to-measure curtains for ideas. For general advice on how windows affect home comfort, the Australian Government’s Your Home glazing guide is also worth a read.




